Menu Icon
Pre Moulded T-Connectors (Front & Rear) for 11kV 630A (for Type-C Bushing)

Pre Moulded T-Connectors (Front & Rear) for 11kV 630A (for Type-C Bushing)

  1. Faster installation.
  2. Non-corrosive and UV resistant.
  3. Capacitive test point.
  4. In-built stress control offering high stress control properties.
  5. Outstanding mechanical, chemical & electrical properties.
  6. Unlimited shelf-life.
  7. In compliance with HD629-1 & IEC-60502-4.
  8. AYD’s compression or shear head mechanical Lugs are recommended.
Enquire Now Arrow Icon
Specifications

Pre Moulded T-Connectors 630A (Type-C) are Tested as per HD629-1 & IEC-60502-4

Technical ParameterT-Connector, 12kV, 630A
ItemParameter
Cable6.35/11 kV
System Voltage12kV
Rated Current630A
Partial Discharge12.5kV/ ≤10pC
A.C. Withstand Test28.5kV/5min.
Selection Table for T-Connector 12kV 630A 1 Core (for XLPE/EPR Insulated Cable)
Cable Cross Section (mm²)Front ConnectorRear Connector
35-70AYDFCC-12-1x35-70AYDRCC-12-1x35-70
95-150AYDFCC-12-1x95-150AYDRCC-12-1x95-150
185-300AYDFCC-12-1x185-300AYDRCC-12-1x185-300
400-500AYDFCC-12-1x400-500AYDRCC-12-1x400-500
630AYDFCC-12-1x630AYDRCC-12-1x630
Selection Table for T-Connector 12kV 630A 3 Core (for XLPE/EPR Insulated Cable)
Cable Cross Section (mm²)Front ConnectorRear Connector
35-70AYDFCC-12-3x35-70AYDRCC-12-3x35-70
95-150AYDFCC-12-3x95-150AYDRCC-12-3x95-150
185-300AYDFCC-12-3x185-300AYDRCC-12-3x185-300
400-500AYDFCC-12-3x400-500AYDRCC-12-3x400-500

Enquire For

Get in touch with 
AL YAMUNA DENSONS

Send us a message

Have a question, idea, or requirement? Drop us a message and our team will get back to you with clear answers no fluff, no delay.

Name
Email
Mobile No.
Company Name
Message
notice
notice