Heat Shrinkable Cable End Caps
Features
- Effectively offering protection against oxidation, ozone, UV radiation etc
- Coated with hot melt adhesive to ensure environment seal
- Easily to fit over the cable end
- Protect power cable up to 1000V and telecommunication cable
- Material: Thermally stabilized cross-linked polyolefin, coated with specially designed hot melt adhesive
- Minimum fully shrink temperature:120°C
Technical Data
Property |
Requirements |
Test Method |
Physical |
|
|
Tensile strength |
8N/mm2 (min.) |
ASTM D 412/ISO 37 |
Ultimate Elongation |
200% (min.) |
ASTM D 412 / ISO 37 |
Continuous Operating Temperature |
-55o C to 120o C |
IEC 216 |
Minimum Shrink Temperature |
120o C |
IEC 216 |
Specific Gravity |
1.1 Max. |
ASTM D 1505 / ISO 1183 |
Dielectric Strength |
10kV/mm min. |
ASTMD 149 / IEC 243 |
Volume Resistivity |
1012 Ohm Cm. (min.) |
ASTM 257 / IEC 93 |
Low Temperature Flexibility |
No cracking at - 20o C |
ASTM D 2671 |
Heat Shock (4 hours at 225o C) |
No cracking, dripping or flowing |
|
Water Absorption |
0.2% max |
ASTM D 570 |
Resistance to Fungus |
Does not support growth |
ASTM G 21 |
Copper Corrosion |
Non Corrosive |
|
Flammability |
Self extinguishing |
ASTM D 2671 B |
Dimension Chart